CP761

CP761 is an acrylic polymer emulsion that offers an alternative method to the Novabond slurry method of surfacing bare concrete.

nova_b.png

When used over clean concrete, CP-761 will improve the adhesion of acrylic coatings to concrete. Allow CP761 to dry completely before next application of Novacrylic surface system.

NEW CONCRETE MUST HAVE:

  • 15 MIL POLYOLEFIN VAPOR BARRIER UNDER THE CONCRETE BASE

  • MEDIUM BROOM FINISH

  • CONTAIN NO CURING AGENTS

  • MUST CURE A MINIMUM OF 30 DAYS

  • ETCHED WITH A PHOSPHORIC ACID WASH

  • BE PREPARED AS INSTRUCTED ON PAGE 6 OF OUR GUIDE TO QUALITY SPORT SURFACES

  • “PERPARATION CONCRETE”

Minimum application temperature is 50F and rising.

Application is with either roller, neoprene rubber squeegee or spray.

#040CP

cp761_pic.png

CONCRETE PRIMER

DILUTION

2 PARTS CP761 TO 1 PART WATER 

SPREADING RATE

160 - 180 SQ. FT. PER GALLON PER COAT 

COLOR

MILKY WHITE COLOR / CLEAR WHEN DRY 

PACKAGED QUANTITY

5 GALLON, 30 GALLON, 55 GALLON 

WEIGHT

8.7 LBS PER GALLON